Plumbing Pipes

There are several types of plumbing pipes out there on the markets today and each of them have the purpose of making the plumbing installation be more and more efficient with every year that passes. Plumbing has come a long way since it was first introduced as a home mandatory feature and iron pipes have come also a long way. This is the article where we are going to talk about the several types of plumbing pipes you can find on the markets today.

The most common type of plumbing pipes used today are iron pipes. Cheap to manufacture and effective, they are used in order to help direct the overall water flow in you house and are also build to last. They can be varied in size and some are uses as main water pipes, and other used as evacuation sources. Nevertheless, if you were to lift a house of its foundation and look under it, you would surely see a complicated maze of iron pipes, all humming with the sound of water passing through them. Also iron pipes come associated with different types of pipe fittings. They are designed to facilitate directional changes in water flow, and come as the elbow piece, the tee formed from three pieces, or the four piece intersection for complicated joints.

Another type of plumbing pipe is the ductile pipe. It is specially designed to withstand strong water flow, and is know for it,s ability to sometimes bend under tension without actually bursting. Rarely used in house holds, they are more the tools for industrial plumbing and they are a bit steeper in price.

One of the last and more advanced types of plumbing pipe is the galvanized iron pipe. This is a special type of pipe which is subjected to an electrical process, in which the pipe is covered with a protective layer of zinc. Zinc has a lower ability to withstand rust, in comparison to iron, thus is will take the first blow of corrosion, protecting the iron. It is a process that is becoming more and more popular today among manufacturers and offers great advantages specially for plumbing purposes. In the case that your pipes will be scratched, the resulting corrosion will attack the layer of zinc, and the iron underneath will be still safe.

These are some of the main types of plumbing pipes, which can be found on the markets today and they each serve their purpose right, however plumbing is advancing as other industries are and we will never know what the future holds.

Kitchen Sink Plumbing Installation Made Easy

It may seem hard and scary to replace your kitchen sink plumbing with a new one. If you have the right tools to do the job, the time to finish it, and the ability to look carefully into details, then you don’t have anything to be afraid of. The task takes one hour at most, and requires no special skills at all; and the tools needed are found in almost every home. The steps are easy and fun and when you do it for the first time it will be exciting to do every time there is something wrong with your plumbing system and you want to save money and time.

What you need for the replacement is two water lines, drain pipes with trap assembly, adjustable wrench, medium pipe wrench, bucket, plumber’s tape and a towel. The process takes place in two major steps, first you need to remove the old sink plumbing, and then you need to install the new one. Each tool will be used in its right time during the course of the job, so don’t get confused about anything.

First of all, you have to shut down the water supply that is feeding the sink, and the valve responsible is often located under the sink itself or sometimes beside it. Then you open the faucets of the sink so that water can get out of pipes and pressure is removed. Use the adjustable wrench to unscrew the cold and hot water line. Detach both of the hot and cold water lines at the point that they connect to the water shut-off valve by unscrewing the bolt.

The drains can be disconnected afterward by reaching the nut placed under the sink drain and turning it with a pipe wrench. Then unscrew the entire pipe line connected to the main drain, this is located right under the center back of the cabinet floor. Prepare the bucket as the S trap will be full of waste water you don’t need to spill on the floor. Now you are done removing the old components and now the replacement begins.

The installation begins by using plumbing tape to wrap the threaded end of the hot water faucet, do the same with the hot water shut-off valve, and then screw the pipe line onto the hot water valve. Repeat all the previous wrapping on the cold water line. The next step is to fit the bottom end of the drain assembly to the main drain located as you left it in the floor cabinet. Don’t tighten the ends onto each other as you need to adjust the height of the assembly so that each side fits its related hole on the bottom of the sink.

Screw each side of the drain with it correspondent drain pipe and tighten the screw firmly this time. Use the pipe wrench to connect the drain assembly to the drain hole on the cabinet floor. Then you are done, but you have to let the water into the system by turning on the water valve and check for leaks, and if they are found, tighten the nearest connection to the leak until it stops.

How Green Plumbing Works For Your Home

Because of the modern technology that we now have, even the plumbing system in our home can be designed so that it can be more earth friendly and can contribute to conservation of natural resources. It is a good thing that even though technology is continuously progressing, we also find ways of contributing to sustainable green living.

It’s a fact that in our homes, the highest amount of water that’s being consumed is in the bathroom and the kitchen. With green plumbing, there are methods which are being implemented within the whole plumbing system so that water consumption may be reduced. It can even allow you to have the water recycled. This is not only good for your water bill but good for the world.

If you are living in Santa Monica, you can also have your water and pipeline system altered such that it will be converted to green plumbing. If you want to be able to locate one that is nearest to you, you can check out different options via the internet. Actually, more and more people are opting to have green plumbing because they will not only be able to save, they can also contribute to preservation or resources.

Some of the innovations that are incorporated in green plumbing can greatly reduce water consumption in the bathroom. The low flow shower head which reduces the need for too much water is an excellent option. I love this because I can have a great shower without leaving such a great footprint. Apart from that, you can also have a low flow toilet or a dual flush toilet installed. Green plumbing also works best for your kitchen. You can have a low flow faucet installed and a regulator for water pressure and dishwashers. Some people think that using a dishwasher may actually consume more water this is not true in some cases. If you have green plumbing installed in your home plumbing system, using machines like a dishwasher does not only make things more convenient but it also saves more resources, particularly water.

Another major concern when it comes to having a green plumbing system installed within your house is the cost. In actuality, if you spend some money in having the installation done, you will really be able to save more in the long run. It will be one of the best investments you can make. So, if you are thinking of having a green plumbing system installed within your home, it is definitely a good thing to consider.