What You Need to Know About Installing Kitchen Plumbing

The fixtures, appliances and plumbing in kitchens are becoming fancier and more complex every day. This means that installing new kitchen plumbing often involves far more than just hooking up a new sink. A modern kitchen will often include a variety of devices that have to be plumbed in. These include the dishwasher, the garbage disposal, and in some cases, the refrigerator. Modern refrigerators often include ice makers or cold water dispensers that have to be connected directly to the plumbing.

Even something as simple as simple as a kitchen sink may include extra faucets and features. This means that the plumbing work in a modern kitchen will often require the services of a professional plumber.

Kitchen Plumbing Basics

There are some plumbing installations in the kitchen that the average person should be able to do themselves, such as hooking up new faucets or garbage disposals. There are other jobs that may require the services of a professional. It’s better for a person who has never attempted plumbing work not to try it, especially if one doesn’t have someone experienced nearby. Although plumbing often looks simple, it can be a complex and a cumbersome chore that requires special tools. Plumbing in the kitchen is often the most complex work of all because it often involves electrical and mechanical devices. Garbage disposals, refrigerators and dishwashers are examples of these devices.

People should always be careful when working in the kitchen because many kitchen devices use both water and electricity. This can quickly lead to electrical shock and other accidents when the work is performed by an inexperienced person.

When to Hire a Plumber for the Kitchen

A good deal of the basic installation in the kitchen can be done by almost everyone. In many cases, this work simply involves connecting an appliance to water pipes and electrical lines. There will be more complex jobs that require the services of a plumber or at least somebody with knowledge and experience in plumbing. An example of such a job would be any work that would require the removal or replacement of pipes. Moving a sink, installing new appliances and totally remodelling the kitchen may require complex plumbing work. Installing a dishwasher in a kitchen that has never had one will require some plumbing, so will hooking washing machines or refrigerators with ice makers.

Any sort of large scale remodelling in the kitchen such as replacing the cabinets or tearing out part of the walls will usually involve some removal or reconfiguration of the pipes. This will often require the services of a plumber. Less involved remodelling jobs such as retiling or putting new fronts on the cabinets probably won’t require a plumber. Even though there are some plumbers who do tiling and other kinds of structural remodelling.

A good way to reduce the costs and time associated with kitchen remodelling is to avoid any such work that requires plumbing. Another good piece of advice is to address the plumbing issues in a kitchen before attempting remodelling. Kitchen plumbing does not have to be costly or complex but it often is. Fortunately installation costs can be kept down by exercising a little common sense.

Ways to Install a PEX Tubing System

Installation of PEX plumbing systems should be carried out strictly according to the project in hand. Normally, PEX plumbing systems are installed by trained professionals with technical knowledge of the system. But if you want to install PEX plumbing systems on your own then there are certain things you would have to keep in mind before you set out to do the actual task of installing a full-fledged PEX plumbing system.

What is PEX?

Firstly, you have to know what PEX is. For the uninitiated, PEX is cross-linked polyethylene. These are often used for radiant heating purposes, but now these are also used extensively for hot and cold plumbing installations. PEX tubing and plumbing systems are easy to work with since they are quite flexible. This is one advantage PEX systems have over normal copper systems. Owing to its design, PEX is also more durable under temperature extremes and chemical attack. It is also highly resistant to creep deformation.
Steps to be followed while installing PEX:

Below is a simple step by step guideline on how to install such a plumbing system. Just follow these steps carefully and you will be able to install a PEX plumbing system at your home without the help of any technician. It will also save you some extra bucks.

Things required for installing a PEX Plumbing system:

  • PEX piping and fittings
  • PEX crimps
  • PEX manifold with ball valves
  • Nailing plates
  • PEX stub outs

Tools:

  • Hammer
  • Soldering machine
  • PEX cutting equipments
  • Straps
  • Hangars
  • Paddle bit
  • Crimp gauge
  • Right-angle drill

Step-1:

Slowly start drilling after you have placed the bit up to the stud. Increase your drilling speed as you move forward. While drilling, just make sure that each hole is at the same level so that the pipe can run parallel to the floor. Also drill through the sill plate and sub-floor for individual water lines.

Step-2:

After you are done with drilling, insert and run the water lines through those holes. In most cases, the water lines come through the floor. But in certain other cases, the lines may come through the wall studs. In those cases, make sure you drill the holes right at the center so that while hanging the board, the screw and nails of the board do not harm or damage the pipes in any way.

Step-3:

Pull the lines upwards through the holes on the sub-floor. Also, run the other end to the area where water will be coming into the home. Leave pout some extra pipes on both the ends. Now use the clamps and secure the lines to the joists. Make sure, you keep the hot and cold lines as far apart as possible to minimize heat transfer.

Step-4:

Now do the rough stub-outs for the sinks. You can use a right-angle drill or a paddle bit to carry out this task. Just make sure to cut-off the rough fitting cap and install finish valves after you put up the walls.

Step-5:

It is now time to install the crimps. For the perfect crimp set up, make sure the PEX is straight when you cut it. Now slide a crimp ring onto and then insert the pipe in the crimp fitting. Use slip-joint pliers to slide the crimp ring up. Do not do it with your fingers, or else you might hurt yourself while tightening the crimp ring. Make sure the crimp ring is 1/8 inches or 1/4 inches from the end of the pipe.

Step-6:

Now rough the lines to the fixtures. Do not solder around the PEX tubing or you might end up damaging the pipes. You should use a fitting called PEX 90. After it has cooled from soldering, you can fit it onto the PEX water line.

Step-7:

Position the valve in a way where they will face down when they are hung in their places. Solder them to their positions.

Step-8:

You can now pull up the water lines from the crawlspace and connect them to the manifold. Screw the top brackets to stud keeping them at eye level. Also install the bottom brackets to the manifold.

Step-9:

Now mark all the holes with a nail and start drilling them. Just make sure you do not damage the manifold while you are doing your drilling work. Put the manifold on the ground after you have finished you drilling work.

Step-10:

Now you can attach the PEX ball valves to the manifold. Screw every valve onto its port properly. Get one of the lines and pull it up to the valve to make sure it fits properly. This type of arrangement will mean that each fixture will have its own shut-off valve.

Step-11:

After you are done with fitting the ball valves, you can now pull up the PEX tubing from the crawlspace and attach them at their places.

How to Maximize the Utility of a Plumbing System?

A plumbing system is considered to be one of the most important components of a building. It is hard for a common man to understand the complexity of the network of pipes. Most of us rely entirely on plumbers when it comes to the installation or replacement of the plumbing parts. Our busy lives do not allow us to take the interest in home improvement affairs which is essential in order to enhance the utility of a house.

However, developing a basic understanding of how water system of a premise operates can be advantageous for the household. Some useful suggestions to maximize the utility of a plumbing system are:

  • Always hire a highly skilled team of plumbers who have plenty of experience in designing and installation. Design, material, and skills are of immense significance in plumbing installation affairs.
  • Consult a certified plumber before buying the material and various fixtures. The substandard material can cause inconvenience in long-term. Moreover, quality of fixtures and pipes should meet globally accepted standards.
  • Always make sure your plumber observes strict adherence to safety measures. It includes the safety of individuals and property. For instance, a sharp end at the corner of a pipe can cause injury. Similarly, a leaking drainage can possibly damage the property.
  • There must be a uniformity or compatibility among all plumbing parts, fixtures and appliances. A network of pipes and drainage should meet the needs of households or businesses.
  • Installation or repair processes should not bring any kind of harm to the community. Only a carefully designed and installed plumbing system would work efficiently without compromising the safety of individuals.
  • Carry out regular maintenance activities, especially the maintenance of drainage system is of great significance. Lack of maintenance activities would lead to the clogged drains
  • Installation of garbage disposal is also recommended as it helps scan the hard elements which can obstruct a sink or a drainage. The kitchen sink is the fixture which should be used carefully. Oily and greasy stuff would start accumulating and result into the rigid blockage.
  • Prevent water from freezing in pipes as frozen water expands and damages the pipe.
  • Always seek assistance from qualified plumbers in case of plumbing emergencies
  • Do not delay necessary repair work. The delay would further worsen the existing issue.

Regular inspection and maintenance

Maintenance can certainly enhance the efficiency of the drainage and supply of clean water. A hidden pipe leak is hard to detect but a well-equipped plumber can trace it down. If left unnoticed, it can cause irreparable damage to a building. Therefore, in order to prevent huge damages and plumber’s bills, it is advisable to pay due attention to every plumbing issue. A healthy pipe system facilitates uninterrupted flow of water and waste. The inspection also highlights issues such as corrosion and deeply hidden leaks. Timely replacement of malfunctioning components helps save money and time. It also increases the overall performance of pipes. Minor but regular maintenance activities prove to be very beneficial for households.